Change History

Version 1.50    06-13-2003
• Made a change to prevent the message requesting an HDD password from appearing when the HDD is starting to fail.
• Made a change to ensure CKE/CLK timing on cold boot to meet the specification from JEDEC.
• Made a change to prevent the system from automatically shutting down immediately after resuming from hibernation when the AC adapter and a battery are removed and re-installed after executing hibernation suspend on Win98SE.
• Made a change to prevent the displayed image from being stretched horizontally on WinNT4 when resuming from display auto-off by pressing a key.
• Enabled wake up from USB mouse connected through HUB for USB 2.0
• Ensured Ring wake-up on WinNT4 to be performed through internal modem.
• Ensured to indicate password input dialogue on Win2k when resuming after warm-swapping from a DVD drive to an HDD with a password.

Version 1.40    04-08-2003

• BIOS was modified to enable the system to automatically identify W/O Common Dock model (PS630E-G2066) for TEG, from it's model number.
• BIOS was modified to display Intel Logo a bit larger in size. The logo appears at the right bottom of the screen along with the Toshiba logo during start-up.
• Corrected an issue where the Matsushita DVD Multi-Drive may fail to work properly when hot-plugged to the select-able bay.
• BIOS modified for memory initialization specification from Intel to satisfy JEDEC SPEC when the following combination of memory modules is being used. (1) Slot A - 128MB - Slot B 512MB (2) Slot A - 128MB - Slot B 1GB (3) Slot A - 256MB - Slot B 1GB. After this modification, there will be no technical limitation on the insertion of a memory module with larger capactiy in slot "A".
• For W/O Common dock model, return value of PnP Function 05h (Get Docking Station Information) has been changed to Function_Not_Supported.

Version 1.30    03-17-2003

• Initial production BIOS for Satellite Pro M10.