ACPI Flash BIOS version 1.40 for Tecra TE2100



File: 4210v14.exe




Version: 1.40
 
Posted Date: 2003-04-07

 

Release Date: 2003-04-02

 

Other Versions

 

Applicable Models
Tecra TE2100

 

Package
WinZIP self-extracting ZIP file creates bootable BIOS update installation diskette when run under Windows 9x, Me, NT, 2000, XP. For other platforms, extract with PKUnZip, Info-Zip, or equivalent utility and follow the instructions in the README.TXT file.
Description

Change History

    Version 1.40    04-01-2003
    • Added support for the thermal control for P-4 2.2GHZ model.
    • Added support for 802.11 a/b combo WLAN.
    • Modified the CPU throttling control.
    • Enabled the access to Teac VA version USB-FDD to be executed within the specified time range when "USB-FDD Legacy Emulation" enabled.

    Version 1.30    12-12-2002

    • Added support for thermal control for 1.9 / 2.0 GHZ models
    • Corrected a problem when set up as follows and powered on, the system stops at the BIOS LOGO display state. SYSTEM SETUP: "USB KB/Mouse Legacy Emulation = Disable" and "USB-FDD Legacy Emulation = Disable"
    • Updated CHGBIOSA.EXE to v4.25

    Version 1.20    07-02-2002

    • Corrected a problem where there was the possibility that the Wireless LAN was not detected.
    • Corrected a problem where tranfer mode of Secondary IDE changes from Ultra DMA to Multi-Word DMA and causes performance to decrease after standby/resume of Windows XP.
    • Corrected a problem where there was a possibility that CPU load will always remain at 100% if the BIOS reports battery information to Windows 2000 in mAH units. This issue depends on software being run.
    • Corrected a problem where, if the unit is operating on battery power running Windows, there is a possibility that the machine will hang. This issue is caused by a bug in the power supply controller and this issue occurs in a C4 state only. Therefore, the C4 support of BIOS was deleted.
    • Corrected a problem where you cannot enter a boot device by pressing "F12" when the machine is powered on. This issue was found in the case of the Toshiba 15GB or 20GB HDD only.

    Version 1.10    04-30-2002

    • Initial Production BIOS for Tecra TE2100.

Export Control and EULA
Use of any software made available for download from this system constitutes your acceptance of the Export Control Terms and the terms in the Dynabook end-user license agreement both of which you can view before downloading any such software.