BIOS Installation - Downloading and Updating your BIOS
- Document ID: 98080557
- Posted Date: 2003-04-03
- Last Updated: 2003-04-03
- Distribution: View Public Website
- Applicable Models
Satellite 1605CDS Satellite 1625CDT Satellite 1675CDS Satellite 1695CDT Satellite 1715XCDS
- Issue
- How to determine, download and upgrade the BIOS for the Satellite 1600 & 1700 Series computers.
- Procedure
How to determine, download and upgrade the BIOS for the Satellite 1600 & 1700 Series computers.
What is the BIOS Version?
The BIOS version can be checked at anytime when powering on the unit. Press [F2] immediately when this message is prompted: "Press [F2] to enter SETUP. ...". BIOS version number can be checked in the lower left of the SETUP menu.
DOWNLOADING BIOS FILE FROM THE TOSHIBA SUPPORT WEB SITE
- Log on to http://pcsupport.toshiba.com
- Click on Tech Support Center.
- Select Product type, Family and Model. Then click on Downloads.
- Scroll down to ACPI Flash BIOS Version x.xxx for
Satellite 16xx/16xx......
To download this latest BIOS version, click on the Download diskette icon.
- Click OK.
EXTRACTING THE DOWNLOADED BIOS FILE
- Insert a blank diskette into floppy drive A, then click
Save
- Click OK after the download process is completed. Go to Windows Explorer, change to [A:]
- Select and double click the downloaded file xxxxvxxx.exe,
then click OK to extract the file
- Click Unzip.
- Click OK.
- By using the same diskette currently in drive A, press (y)
then Enter.
- Press any key to continue...
- The contents of README.TXT file will be displayed
Note: When you are finished looking over the Readme.TXT file press Esc to close the Readme file and return to Windows.
UPGRADING THE BIOS
To upgrade the unit's BIOS
Note: The unit should have either a fully charged battery installed or an AC adapter plugged in:
- Insert the new created Flash BIOS Installation Diskette Vx.xx into the unit to be upgraded.
- Power ON, system will boot automatically from this Flash
BIOS Installation Diskette Vx.xx. A message will prompt
the user for selecting either: CANCEL [Ctrl-C] or
CONTINUE
[press any key] with the BIOS upgrade process. - Press a key to continue with the upgrade process.
- The BIOS ROM file will be loaded when a key is pressed
- This step takes about two minutes to complete.
- Once the BIOS ROM file has successfully loaded, the display will black out for few seconds. - Remove the Flash BIOS Installation Diskette Vx.xx. System is now rebooting from the hard drive.
- Export Control and EULA
- Use of any software made available for download from this system constitutes your acceptance of the Export Control Terms and the terms in the Dynabook end-user license agreement both of which you can view before downloading any such software.