Release Notes

• The BIOS update will force the computer to shut down or restart. Please make sure to save all work in progress before starting BIOS updates.
• For CD-ROM BIOS updates: (1) Shut down the system while pressing the SHIFT key to completely power off. (2) Power on while pressing F2 to enter the BIOS Setup Menu. (3) From the Security tab and set the "Secure Boot" setting to "Disabled". (4) From the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot" if the option is available. (5) Press F10 to save and exit. (6) Boot from the BIOS CD-ROM then type BIOS at the prompt. (7) After the BIOS update has completed, restore the BIOS settings that were changed.
• Note: The BIOS Launcher "CD_ROM Installation" option may not automatically proceed to burn the CD-ROM. If this occurs navigate to the root directory of the C-Drive then open the directory named after the BIOS filename (ex. C:\sptjv510), then manually burn the CD-ROM from the disc image (ISO) file.
• After the BIOS update completes, power on the computer if it is off.
• While the "TOSHIBA" logo is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS, press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

Version 5.20 - 2015-11-05
• Fixed: Cannot set or change the password in BIOS Setup by using the Touch Panel.
• Modified to report the correct battery current for the Windows 10 charging time calculation.
Version 5.20 - 2015-11-18
• Fixed: Cannot set or change the password in BIOS Setup by using the Touch Panel.
• Modified to report the correct battery current for the Windows 10 charging time calculation.
Version 5.10 - 2015-08-03
• Modified to protect the PSP NVRAM area when flashing the BIOS.
• Updated the AMD PI version to 1004.
Version 5.10 - 2015-08-03
• Modified to protect the PSP NVRAM area when flashing the BIOS.
Version 5.00 - 2015-07-21
• First release for Windows 10 use.
• Set the DMI Type 2 defaults for Manufacturer (FF50) and Product (06F7)
• Set Serial Peripheral Interface (SPI) read: Fast read 100Mhz: write: FIFO IO.
• Added UHD resolution to follow specification for applicable models.
• Fixed: System Configuration Utility (SCU) color of the MAIN characters.
• Fixed: Power Log data issue.
• Updated the chipset code to 05.05.08.0020 for an audio SSID issue.
• Fixed: Virtual Keyboard character issue.
• Fixed: After flashing the BIOS the owner string is not kept.
• Fixed: Internal keyboard lag in the SCU.
• Changed the Embedded Controller (EC) version to V4.06 for Windows 10.
• Fixed: ACPI override cannot get each ACPI table.
• Modified the F1/Fn+F1 hotkey scan codes to WIN + S.
• Updated AGESA PI to 1.0.0.3.
• Modified the thermal table.
• Fixed: SSID disappears while in Soft Off (S5), and Hibernation (S4) system power states.
Version 5.00 - 2015-07-21
• First release for Windows 10.
• Changed the TPM default setting to Disable.
• Updates the PI (Platform Initialization)to 1.1.0.0.
• Corrected GFX lane setting.
• Fixed an HLK watchdog timer test issue.
• Updated the chipset to 05.05.24.0025.
• Updated PSP firmware v0.2.0.35.
Version 1.10 - 2015-05-27
• Updated PI (Platform Initialization) to V1.0.0.6.
Version 1.00 - 2015-05-08
• Initial production release for this model.