Change History

Version 1.40 - 2015-07-16
• Made a change to reduce the response time of the Power-key when entering the Power-off Charging Mode.
• Updated the EC firmware to V20 to improve the delay time of the Power-key when plugged in to an AC Adapter, and Hibernation (S4).
Version 1.30 - 2015-04-16
• Fixed an issue where the BIOS System Configuration Utility (SCU) settings cannot be preserved after updating the BIOS with the Windows Flash tool.
• Fixed a sensor calibration issue.
• Updated the EC firmware to V19 to change the Power-off threshold to avoid a short RTC battery life.
Version 1.20 - 2014-12-5
• Updated the Power Log function will skip a reboot event during BIOS POST to avoid extra records.
• Updated the ASL code with rear camera information.
• Updated the UEFI BIOS update process to ignore the AC check.
• Fixed issues that occurred when turning on the Fastboot feature. (USB LAN dongle cannot be identified, F2/F12 does not work).
• Fixed the power sequence of the rear camera.
Version 1.00 - 2014-10-23
• Initial production BIOS release for these models.



Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop.
2. Save all work in progress and close open applications.
3. Connect the AC Adapter and ensure the Tablet battery is charged.
4. From the Windows Desktop, run the downloaded file to start the installation.
5. Press the Start button at the Toshiba Archive Extractor window.
6. If a User Account Control window is displayed, press Yes.
7. A caution screen will be displayed. Verify all conditions are met then press OK
8. After the update has completed, please restart the system.