1. Code search may detect the correct code. Performing a code search can take up to 20 minutes.
2. You can do the code search by:

          a. Prepare the remote control. Point the remote away from your DM Server and cover the front end with your hand. Refer to the table below and determine   which two buttons to press to prepare the remote. Press and hold the buttons simultaneously for more than 5 seconds.

          b. Enter the search code. Refer to the table below and use the number keys on your remote control to enter the appropriate code. Test the remote control.  Point the remote control at the TV or A/V stereo system. Press CHAN UP to test the first code. Did the TV or A/V stereo system turn off? If not, wait two or three seconds, and then press CHAN UP again. Continue doing this until the TV or A/V stereo system responds. When the TV or A/V receiver does turn off, press SELECT/ENTER to select the current code. Unfortunately, due to the great variety of TVs and A/V stereo systems, some makes and models are not compatible with your DM Server’s remote control. If you reach the end of the available codes without finding a code that works with your device, you will need to use your TV or A/V stereo system’s remote to turn it on and off, and control the volume.