Programming Channels on your VCR.



Document ID: 98083259

 

Posted Date: 2010-11-01

 

Last Updated: 2010-11-01

 

Distribution: View Public Website

 

Applicable Models
VCR W422
VCR W522
VCR W525
VCR W528
VCR W614
VCR W622
VCR W627
VCR W701
VCR W704
VCR W705
VCR W706
VCR W707
VCR W708
VCR W714
VCR W717
VCR W727
VCR W804
VCR W808

 

Information

To proam your VCR Channels:

  1. Turn your TV on to the proper channel or input for your VCR.
  2. Make sure the VCR is turned on.
  3. Press the VCR or TV/VCR button on your remote to make sure the VCR is in “VCR” mode.
  4. Press the PROGRAM or PROG button on your VCR’s remote control.
  5. Select CHANNEL MEMORY, or PRESET (followed by CHANNEL MEMORY) on the menu that appears on the screen.
  6. Select TV/CATV or TV/CABLE on the new menu that appears. Set this to TV if you are receiving your TV signal through an antenna or set it to CATV/CABLE if you are receiving your TV signal through cable or satellite.
  7. Once TV/CATV or TV/CABLE is set correctly, please select AUTO SCAN from the menu to automatically scan for and add all channels currently being received through your connection.
  8. Press the PROG button again to exit once the scanning is complete.

 

Export Control and EULA
Use of any software made available for download from this system constitutes your acceptance of the Export Control Terms and the terms in the Dynabook end-user license agreement both of which you can view before downloading any such software.