ACPI Flash BIOS version 2.80 for Satellite P305D (PSPD0U) 32/64-Bit



File: spd0v280.exe




Version: 2.80
 
Posted Date: 2009-03-03

 

Release Date: 2009-02-19

 

Other Versions

 

Package
WinRAR self-extracting ZIP file includes both Windows-based and diskette based BIOS update installation options. See the included documentation for details.
Description

Release Notes

  • BIOS V2.60 change points were combined with BIOS V2.80 change points.

    • Change History

      Version 2.80 - 2009-02-19
      • Added support for the 64-bit Windows BIOS.
      • Improved: Fn+F9 cannot enable/disable the touchpad function.
      • Improved: System is always awakened by LAN from S5 after an S4 Resume.
      • Changed the DMI setting for Computrace.
      • Improved: Some noise can be heard when a Fujitsu HDD is powered on.
      • Per new spec., the BIOS password is copied to EEPROM and the CMOS and EEPROM password values are compared during POST. If the values are different, the BIOS will copy the EEPROM value to CMOS.
      • Improved: System boots from other device when the volume wheel is turned.
      Version 2.30 - 2008-08-12
      • Corrected: Write failures occur when updating the flash ROM.
      • Corrected: The system shuts down after a CIR wakeup in battery mode.
      • Corrected: Wrong numbers are shown when numbers are typed quickly.
      Version 2.10 - 2008-05-20
      • Corrected: Computer hangs while booting when a Realtek WLAN is installed.
      • Added support for the MC25L8005 Flash ROM.
      • Added support for the ALPS touchpad.
      Version 2.00 - 2008-04-28
      • Changed: DMI product name strings of 31 bytes are supported.
      • Corrected: Some computers can not report the fingerprint status correctly.
      • Corrected: The Master Password for the 2nd HDD can not be cleared.
      • Corrected: The computer does not resume and auto launch Windows Media Player when the Media Button is pressed.
      • Corrected: The USB Sleep and Charge function does not work when enabled.
      • Changed the HDMI-CEC command transfer timeout value to 500ms.
      • Corrected: USB memory can not be recognized correctly after resuming from S3 (Sleep mode) when the USB Sleep and Charge function is disabled.
      • Corrected: Pressing other buttons before pressing the Media Player Button will cause the computer to not wake up.
      Version 1.80 - 2008-03-07
      • First release.
    Export Control and EULA
    Use of any software made available for download from this system constitutes your acceptance of the Export Control Terms and the terms in the Dynabook end-user license agreement both of which you can view before downloading any such software.