(2) Connect the Power cord to the projector and plug it into the appropriate power outlet. The fans start. The Lamp LED on the keypad lights orange when power is connected. The Lamp LED on the keypad turns GREEN when the software has initialized and the projector is ready to be turned ON.

(3) Once the Lamp LED is GREEN, Press the Lamp ON button.

�

(4) Adjust the image position with Zoom, Focus and the Elevator foot for best picture.

�

(5) Power ON the computer.

�

(6) If necessary, press the activation keys on your computer to see the image on the screen. Most computers will automatically recognize that the projector is connected and send a video signal to the Digital Projector. In many cases this can be manually controlled to display images on both computer and projector if desired.

�

For more information on Computer Activation Keys, please refer to the computer operation manual. A list of common controls is also supplied on-line for your convenience.
Click here to review an Activation Chart for common controls.

�

Computer connections also allow you use the Digital Keystone correction feature of the Digital Projector. Keystone effect is when the bottom of the image appears smaller than the top of the image due to the angle of the projected image. Digital Projectors can utilize the digital data from computer signals to correct this effect and create a square image with no distortion.
Click here to review the Keystone Correction menu option.