How to connect a second serial device to the Equium 7000/7100

Document ID: 98050607
Posted Date: 2000-02-28
Last Updated: 2000-02-24
Distribution: View Public Website

Issue

The Equium desktop is configured with a second serial port on the motherboard. The second serial port does not have an external 9 pin serial connector on the back of the unit.

Procedure

You can connect a serial device to the second serial port on the
motherboard using the following cable assembly, part # F000024850.
This cable assembly can be purchased from a Toshiba authorized
service provider.

NOTE: You may need to configure the second serial port in system BIOS
using the following procedure.
1. Enter System BIOS Setup by pressing the "F2" key at boot when
     prompted.
2. Go to "Advanced -> I/O Device Configuration -> Serial port B".

COMMENTS:
You can locate the service provider in your area at
www.pcsupport.toshiba.com.

Export Control and EULA

Use of any software made available for download from this system constitutes your acceptance of the Export Control Terms and the terms in the Dynabook end-user license agreement both of which you can view before downloading any such software.