Tecra 750CDT Applications CD Instructions

Tecra 750CDT Applications CD Instructions

Document ID: 98050357

Posted Date: 1999-08-11

Last Updated: 1999-08-11

Distribution: View Public Website

Applicable Models

Tecra 750CDT

Issue

This document provides detailed instructions for reconfiguring the Tecra 750CDT notebook using the bundled Applications CD.

Procedure

Tecra 750CDT Applications CD Instructions

Your computer comes with programs preinstalled on your hard drive. In the event you need to reinstall these programs, follow these guidelines to reconfigure your computer to its original factory setup.

Each section of this guide describes how to reinstall or reconfigure one program or a group of programs. If you need to reinstall all of the preinstalled programs, start at the beginning and work through the entire guide. Otherwise, read only the sections that apply to the programs you need to reinstall.

750CDT Applications CD Table of Contents
Before You Start
Installing the S3 Display Drivers
Installing the Windows 95 OSR2 Supplement
Installing MACHINE.INF for IRQ Routing
Installing the Tecra 750 Machine Identifier
Install the Toshiba Real-Mode DOS Mouse Driver
Installing the Unimodem V Drivers
Installing America Online (Update)
Installing the HDD Password Utility (DOS)
Installing the HDD Password Utility (Windows 95)
Installing Microsoft NetMeeting
Installing RingCentral
Installing Intel Video Phone
Installing Toshiba magiCDisc
Installing the Toshiba User's Guide
Installing the Toshiba Wallpaper
Installing Toshiba Product Registration
Installing the Yamaha Audio Rack
Installing IntelliSync 97 for Windows
Installing Indeo Video Interactive (32-bit)
Installing the Jixxa Puzzle Sampler
Installing LANDesk Client Manager
Installing Mediamatics Arcade Media Player
Installing Mediamatics Arcade Video CD Player
Installing Toshiba CardWorks
Installing the TAP System
Installing the Toshiba Access Panel
Installing Fn-esse
Installing the TAP System Help Videos
Install Microsoft Internet Explorer
Installing VideoBrush Whiteboard
Installing the Panning Support Driver


	NOTE: After following the instructions in this guide, all of the preinstalled programs will be on your hard disk and ready to use. The appearance of your desktop may be different than when you turned the computer on the first time, but these changes are cosmetic only and will not affect the operation of your programs.

Before You Start

The instructions in this section make the following assumptions:

Your hard disk is already formatted.
You'll install only the options that were preinstalled at the factory.

To complete the steps in this guide, you'll need:

Four blank, formatted, 1.44 MB diskettes
The Microsoft(R) Windows(R) 95 Companion CD

You should have received this CD with your computer.

The Applications CD

Table of Contents

Installing the S3 Display Drivers

To install the display drivers:

1 Click Start, then point to Settings.
2 Click Control Panel.

Windows 95 opens the Control Panel.

3 Double-click Display.

Windows 95 opens the Display Properties dialog box.

4 Click the Settings tab to bring it to the front.
5 Click Advanced Properties.
6 On the Adapter tab, click Change.
7 Click Have Disk.
8 Make sure the Applications CD is inserted in the CD-ROM drive, then type e:\display and click OK.

Windows 95 displays the Select Device dialog box.

9 Select S3 Inc. Virge/MX and click OK.
10 Click Close.
11 In the Display Properties dialog box, select 256 Color from the Color Palette box.
12 Move the Desktop area slider to select 1024 by 768.
13 Click Close.
14 Click Yes to restart the computer.

Table of Contents

Installing the Windows 95 OSR2 Supplement

To install the Windows 95 OSR2 Supplement:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Windows 95 OSR2 Supplement.
3 Click Install.

The installation program copies the files to your hard disk.

4 When the installation is complete, press Alt and F4 simultaneously to close the MS-DOS(R) box.
5 Restart Windows 95 for the changes to take effect.

Table of Contents

Installing MACHINE.INF for IRQ Routing

To install the MACHINE.INF file for IRQ Routing:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click MACHINE.INF for IRQ Routing.
3 Click Install.

The installation program starts copying the files to your hard disk.

4 When prompted, press C to continue.
5 When the installation is complete, press Alt and F4 simultaneously to close the MS-DOS window.

Table of Contents

Installing the Tecra 750 Machine Identifier

To install the Tecra(TM) 750 Machine Identifier:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Tecra 750 Machine Identifier.
3 Click Install.

The installation program copies the files to your hard disk.

4 When the installation is complete, press Alt and F4 simultaneously to close the MS-DOS window.

Table of Contents

Install the Toshiba Real-Mode DOS Mouse Driver

To install the Toshiba Real-Mode DOS Mouse Driver:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Toshiba Real-Mode DOS Mouse Driver.
3 Click Install.

The installation program starts copying the files to your hard disk.

4 When prompted, click Next.
5 Click OK.

Table of Contents

Installing the Unimodem V Drivers

To install the Unimodem V Drivers:

1 Insert the Applications CD into the CD-ROM drive, if you haven't already done so.
2 Double-click the My Computer icon.

Windows 95 opens the My Computer window.

3 With the secondary AccuPoint button, click the icon for the CD-ROM drive (E:).

Windows 95 displays a shortcut menu.

4 Click Open.
5 Double-click Unimodem.
6 With the secondary AccuPoint button, click unimodv.
7 Click Install.
8 When the installation is complete, click Yes to restart the computer.

Table of Contents

Installing America Online (Update)

To install America Online(R) (Update):

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click America Online (Update).
3 Click Install.
4 Click Yes.
5 Click the America Online icon.
6 Click Continue.
7 Click Install.
8 Click OK.
9 Click OK.

Table of Contents

Installing the HDD Password Utility (DOS)

To install the HDD Password Utility (DOS):

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click HDD Password Utility (DOS).
3 Click Install.

The installation program starts copying files to your hard disk.

4 When prompted, press C to continue.
5 When the installation is complete, press Alt and F4 simultaneously to close the MS-DOS window.

Table of Contents

Installing the HDD Password Utility (Windows 95)

To install the HDD Password Utility for Windows 95, you'll need one formatted 1.44 MB diskette.

1 Insert the formatted diskette into the diskette drive.
2 Insert the Applications CD into the CD-ROM drive, if you haven't already done so.
3 Click Start, then point to Programs.
4 Click MS-DOS Prompt.

Windows 95 opens an MS-DOS window.

5 At the MS-DOS prompt, type xcopy e:\hddwin\*.* a: and press Enter.
6 Type a: and press Enter.
7 Type install and press Enter.

CAUTION: Do not try to install these files directly from the Applications CD. They must be installed from diskette.

The installation program starts and begins copying files from the diskette to your hard disk.

8 After the installation is complete, type exit and press Enter to close the MS-DOS window.
9 Restart the computer.

Table of Contents

Installing Microsoft NetMeeting

To install Microsoft NetMeeting(TM):

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Microsoft NetMeeting.
3 Click Install.
4 Click Yes.
5 Click Yes.
6 Click OK.
7 Click OK.

Table of Contents

Installing RingCentral

To install RingCentral(R):

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click RingCentral.
3 Click Install.
4 Click Next.
5 Click Next to accept the default destination directory.
6 Click Next to accept the default setting, ``I want to save all my old messages and mailboxes.''
7 Click Next.
8 Click Next to accept the default setting, ``I want to leave my old printer as default.''
9 Click Next.
10 Click Yes to restart the computer.

Table of Contents

Installing Intel Video Phone

To install the Intel(R) Video Phone:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Intel Video Phone.
3 Click Install.
4 Follow the instructions on the screen to complete the -installation.

Table of Contents

Installing Toshiba magiCDisc

To install Toshiba magiCDisc(TM):

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Toshiba magiCDisc.
3 Click Install.
4 Click OK.
5 Click OK to accept the default directory.
6 Click OK to complete the installation.

Table of Contents

Installing the Toshiba User's Guide

To install the Toshiba User's Guide:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Toshiba User's Guide.
3 Click Install.
4 Click OK.

Table of Contents

Installing the Toshiba Wallpaper

To install the Toshiba wallpaper:

1 Click Start, then click Run.

Windows 95 opens the Run dialog box.

2 Type e:\toshlogo\install and click OK.
3 When prompted, press C to continue.
4 When the installation is complete, press Alt and F4 simultaneously to close the MS-DOS window.
5 Click Start, then point to Settings.
6 Click Control Panel.

Windows 95 opens the Control Panel.

7 Double-click the Display icon.

Windows 95 opens the Display Properties dialog box.

8 Click the Background tab to bring it to the front.
9 From the Wallpaper box, select Toshlogo.
10 Click OK.

Table of Contents

Installing Toshiba Product Registration

To install Toshiba Product Registration:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Toshiba Product Registration.
3 Click Install.
4 Click OK.
5 Click Mobile.
6 Click OK to accept the default destination directory.
7 Click OK to accept the default program group.
8 Click OK.

Table of Contents

Installing the Yamaha Audio Rack

To install the Yamaha Audio Rack:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Yamaha Audio Rack.
3 Click Install.
4 Click OK.
5 Click OK to accept the default destination directory.
6 Click OK.

Table of Contents

Installing IntelliSync 97 for Windows

To install IntelliSync 97(TM) for Windows, you'll need a one formatted, 1.44 MB diskette.

1 Insert the formatted diskette into the diskette drive.
2 Insert the Applications CD into the CD-ROM drive, if you haven't already done so.
3 Click Start, then point to Programs.
4 Click MS-DOS Prompt.

Windows 95 opens an MS-DOS window.

5 At the MS-DOS prompt, type e: and press Enter.
6 Type xcopy e:\intelli\oem_d~11\*.* a:\ and press Enter.

The system copies files from the Applications CD to the diskette.

7 Type exit and press Enter to close the MS-DOS window.
8 Double-click the My Computer icon.

Windows 95 opens the My Computer window.

9 Click the CD-ROM drive icon (E:) with the secondary AccuPoint button.

Windows 95 displays a shortcut menu.

10 Click Open.
11 Double-click the Intelli folder.
12 Double-click Setup.exe.
13 Click Next.
14 Click Next to accept the default destination directory.
15 Click Next to accept the default program folder.
16 With the diskette in the diskette drive, click OK.
17 Click Yes if you would like IntelliSync in the Startup group.
18 To configure an infrared device, click Yes.

To continue the installation without configuring an infrared device, click No.

19 Click OK to complete the installation.

Table of Contents

Installing Indeo Video Interactive (32-bit)

To install Indeo(R) Video Interactive (32-bit):

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Indeo Video Interactive (32-bit).
3 Click Install.

Table of Contents

Installing the Jixxa Puzzle Sampler

To install the Jixxa Puzzle Sampler:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Jixxa Puzzle Sampler.
3 Click Install.
4 Click OK.
5 Click OK to accept the default destination directory.
6 Click OK.
7 Click OK to complete the installation.

Table of Contents

Installing LANDesk Client Manager

To install LANDesk(R) Client Manager:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click LANDesk Client Manager.
3 Click Install.
4 Click Next.
5 Click Next.
6 Click Next to accept the default of 750CDT.
7 Click Next to accept the default destination directory.
8 Click Next to accept the default program folder.
9 Select Yes, restart the computer and click Finish.

Table of Contents

Installing Mediamatics Arcade Media Player

To install Mediamatics Arcade Media Player:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Mediamatics Arcade Media Player.
3 Click Install.
4 Click Next.

Table of Contents

Installing Mediamatics Arcade Video CD Player

To install Mediamatics Arcade Video CD Player:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Mediamatics Arcade Video CD Player.
3 Click Install.
4 Click Next.

Table of Contents

Installing Toshiba CardWorks

To install Toshiba CardWorks(TM), you'll need two formatted, 1.44 MB diskettes.

Creating the Installation Diskettes

Before you can install the software, you must create two installation diskettes.

1 Insert one formatted diskette into the diskette drive.
2 Insert the Applications CD into the CD-ROM drive, if you haven't already done so.
3 Click Start, then point to Programs.
4 Click MS-DOS Prompt.

Windows 95 opens an MS-DOS window.

5 At the MS-DOS prompt, type e:\cardwks\disk1\*.* a:\ and press Enter.

The system copies the files from the Applications CD to the diskette.

6 Remove the diskette from the diskette drive and label it Disk 1 of 2.
7 Insert the second formatted diskette into the diskette drive.
8 At the MS-DOS prompt, type e:\cardwks\disk2\*.* a:\ and press Enter.

The system copies the files from the Applications CD to the diskette.

9 Remove the diskette from the diskette drive and label it Disk 2 of 2.
10 Type exit and press Enter to close the MS-DOS window.

Installing CardWorks from the Installation Diskettes

You cannot install CardWorks from the Applications CD. Instead, use the CardWorks installation diskettes.

1 Insert Disk 1 into the diskette drive.

You created this diskette by following the instructions in the previous section.

2 Click Start, then click Run.

Windows 95 opens the Run dialog box.

3 Type a:\setup and click OK.
4 Click Next.
5 Click Next.
6 Click Next to accept the default destination directory.
7 Select Typical and click Next.
8 Select 2 Slots and click Next.
9 When prompted, remove Disk 1 from the diskette drive and replace it with Disk 2.

You created this diskette by following the instructions in the previous section.

10 Click No when prompted to open the Readme file.
11 Click Finish to complete the installation and restart the computer.

Table of Contents

Installing the TAP System

To install the TAP System:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click TAP System.
3 Click Install.
4 Click Next.
5 Click Next to accept the default directory.
6 Click Finish.
7 Click Finish to restart the computer.

Table of Contents

Installing the Toshiba Access Panel

To install the Toshiba Access Panel:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Toshiba Access Panel.
3 Click Install.
4 Click Next.
5 Click Finish.
6 Click Finish to restart.

Table of Contents

Installing Fn-esse

To install Fn-esse(TM):

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Fn-esse.
3 Click Install.
4 Click Next.
5 Click Next to accept the default destination directory.
6 Click Finish.

Table of Contents

Installing the TAP System Help Videos

To install the TAP System Help Videos:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click TAP System Help Videos.
3 Click Install.
4 When prompted, press C to continue.

Install Microsoft Internet Explorer

To install Microsoft Internet Explorer:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Microsoft Internet Explorer.
3 Click Install.
4 When prompted, click Yes to accept the End User License Agreement for Microsoft Internet Explorer.
5 Click Yes to restart the computer.

Table of Contents

Installing VideoBrush Whiteboard

To install VideoBrush(TM) Whiteboard:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click VideoBrush Whiteboard.
3 Click Install.
4 Click Next.
5 Click Yes to accept the software license agreement.
6 Click Next.
7 Click Next to accept the default directory.
8 Click Next to accept the default program folder.
9 Click Next.
10 Click Finish.

Table of Contents

Installing the Panning Support Driver

To install the panning support driver:

1 Open the Toshiba Application CD Setup window, if it's not already open: a Insert the Applications CD into the CD-ROM drive, if you haven't already done so. b Double-click the My Computer icon.

Windows 95 opens the My Computer window.

c Double-click the icon for the CD-ROM drive (E:).

The Toshiba Application CD Setup window opens.

2 Click Panning Support Driver.
3 Click Install.
4 When prompted, press C to continue.
5 When the installation is complete, press Alt and F4 simultaneously to close the MS-DOS window.
6 Restart the computer.

Export Control and EULA

Use of any software made available for download from this system constitutes your acceptance of the Export Control Terms and the terms in the Dynabook end-user license agreement both of which you can view before downloading any such software.