Installation of Intel Pro 100B LAN Adapter in Windows NT 4.0

Document ID: 94000011

Posted Date: 1996-08-19

Last Updated: 1996-08-19

Distribution: View Public Website

Applicable Models

Satellite All

Qosmio All

Portege All

Tecra All

Satellite Pro All

Information: Intel PRO 100B LAN ADAPTER

This procedure describes how to install the LAN Adapter driver
separately from installation of networking protocols and other
networking options. After installing the LAN Adapter driver,
it may be necessary to install any protocols and clients for
the system's desired configuration.

Note that if Networking has never been installed on the system,
the procedure may result in error message(s) indicating that
conversion of the Winsock files has failed. This will occur
when the Networking dialog box is closed. This is normal and
can be ignored (the Winsock files will be installed properly
when networking is installed).

1. Select My Computer, then Control Panel, then Network.
2. If the dialog box asking "Windows NT networking is not
installed. Install it now?" comes up, select NO.
3. Select the Adapters tab on the Network dialog box.
4. Click the Add button.
5. Select Network Adapter dialog box is displayed; click on
the Have Disk button.
6. In the Insert Disk dialog box, change the path to
E:\ethernet.
7. The Select OEM Option dialog box appears; select the option
"82557-based 10/100 Ethernet PCI Adapter". Click OK.
8. After installation of the driver files, the Intel Proset
dialog box will appear. Click on OK to select the default
configuration.
9. Click on the Close button to close the Network dialog box.
10. Restart the computer when prompted.
Export Control and EULA: Use of any software made available for download from this system constitutes your acceptance of the Export Control Terms and the terms in the Dynabook end-user license agreement both of which you can view before downloading any such software.