ACPI Flash BIOS version 2.90 for Qosmio X505 (PQX33U)



File: qx33v290.exe




Version: 2.90
 
Posted Date: 2010-12-21

 

Release Date: 2010-12-10

 

Other Versions

 

Package
WinRAR self-extracting ZIP file includes both Windows-based and diskette based BIOS update installation options. See the included documentation for details.
Description

Release Notes

  • After the update completes, the computer will automatically shut down or restart.
  • Power on the computer if it is off.
  • While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
  • Check the version of BIOS and press the F9 function key to load setup defaults.
  • Press the F10 function key to save settings and exit. The computer will automatically reboot.

Change History

    Version 2.90 - 2010-12-10
    • A change was made to adjust and increase the maximum brightness of the computer display.
    • Updated the ACPI SLIC table.
    Version 2.80 - 2010-09-16
    • Fixed: On a long web page, with the cursor on the vertical scroll bar, a single tap of the left touch pad button causes the page to move twice, as if the button were double-tapped.
    • Fixed: Sleep and Charge setting-related anomaly where the system will not power on. In this situation, the AC Power Light is on but the Battery Light is off even though the AC Adapter is connected.
    Version 2.70 - 2010-09-10
    • Fixed: HWsetup can't change Legacy USB Support.
    • Fixed: Intermittent Owner string errors.
    • Fixed: Incorrect audio H/W ID (SSID).
    • Updated the EC for a new TZ1V thermal table.
    • Fixed: Unknown characters in the BIOS setup menu when the language is set to Japanese.
    • Fixed: HDD noise during warm reboots.
    Version 2.60 - 2010-06-11
    • Removed: "Set CPU reset command" after changing the Multi-core setting.
    • Made a change to improve a "reboot after a Sleep (S3) resume issue" that occurred after enabling Sleep and Charge and restarting.
    • undefined
    • Added support for the Intel K0 step CPU.
    • Enabled the CRID for new CPUs.
    • Added support for the new O2 chipset version.
    • Updated the EC to reduce the possibility of an abnormal cooling system message. (EC-0.30)
    • Fixed: Memory size error in 64-bit Operating Systems.
    Version 2.20 - 2010-02-23
    • Modified the LID function.
    • Updated the verb table.
    • Added a solution for USB port 6/7 sightings issues.
    • Added a solution for the Synchronous Interrupt Ordering sightings issue.
    • Changed reboot to warm boot, and also fixed an issue where resuming from S3 caused reboots.
    • Updated the EC to version 0.28.
    • Set a CPU reset command after Multi-core setting changes.
    Version 1.90 - 2009-12-31
    • TLC mode supports Computrace.
    • Disabled ASPM of the WLAN.
    • Removed the "for Evaluation only" string from POST.
    • Restored the Thermal base address after S3 Resume.
    • Program HDMI while S3 Resume.
    • Fixed: "F12 string" issue.
    • Changed the EC to TZ1H_26.bin.
    • Disabled HDMI by GPIO in the _PS0 method.
    • Fixed "S4 Resume fails after loading defaults."
    Version 1.40 - 2009-12-25
    • Removed the numbers in the boot menu.
    • Added initialization of a new OZ device.
    • Modified the OEMID in the ACPI table.
    • Disabled ASPM of PCIE port3.
    • Modified ASPM of a PCI device.
    • Added a beep command to avoid a sound issue.
    • Fixed a "WHQL-Hal timer tests (HCT) issue.
    • Added hot key & power-on display device switch support.
    • Modified the keyboard backlight code.
    • Modified the CPU type string in the Setup menu.
    • Fixed: can't detect the ODD in SATA Compatibility mode.
    • Updated the kernel code to version 1.48.00.
    • Disabled Nucard ASPM.
    • Removed items 9~24 on the boot menu.
    • Made a change to report ID 0502.
    • Disabled the FM function in the Audio Codec.
    • Filled SVID, and SSID into Bus0:dev1:fun0 for a WHQL issue.
    • Depend on the SKU, shows "USB Sleep and Charge" in the setup menu.
    • Programmed the VGA device for non-HDMI SkUs.
    • Made a change to correct memory size information.
    • Checked TJ 90 to send an EC CMD for setting different thermal tables.
    • Fixed: System recovery image goes to the 2nd HDD from USB key boot on two-HDD SKUs.
    • Set the CCD USB topology setting to 055fh
    • Fixed an incorrect BIOS version issue.
    • Enabled ASPM support for Nvidia VGA.
    • Updated the EC to TZ1H_25.bin.
    • Added throttling support.
    • Depending on SKU, Turbo Boost is disabled.
    • Filled the VSCC table.
    Version 1.10 - 2009-09-19
    • Initial production BIOS for this model.
Export Control and EULA
Use of any software made available for download from this system constitutes your acceptance of the Export Control Terms and the terms in the Dynabook end-user license agreement both of which you can view before downloading any such software.